Are you considering an EV Charger installation at your Darlington area home? Looking for an experienced electrician to carry out the installation? Demand Electrical Solutions are here to help.
EV Charger Installation in Mowden
Here you can see some photos from one of our most recent EV charger installations in the Mowden area of Darlington. It was a new electric vehicle charging circuit to be installed at the front of a property.
EV Charger Installation Process
The property had been fully re wired in 2023 but they had used a dual RCD consumer unit. Because of this we installed our own smaller consumer so that we could fit a bi directional RCBO and surge protection.
We left plenty of spare ways for any future works that the customer requires, they can then have there circuits segregated on RCBO which reduces nuisance tripping and makes fault finding easier.
We used 6mm EV ultra cable which was clipped around the garage high level to a 7kw Pod Point Charger. This charger had been installed previously at the customers last house. In the process of moving the CT clamp had been lost.
Hence why the small black cable isn’t connected, this CT cable when in use basically monitors the load on the whole installation. Should the load exceed the main fuse size the car charger would sense that and power down accordingly.
On completion all new circuits were tested, an electrical installation certificate and building control notification was issued digitally.
EV Charger Installer Darlington
If you're looking for an electrician in Darlington to safely install and EV charger at your home, call Demand Electrical Solutions today for a free quote.
